Главная
/
Hardi
/
COMMANDER DELTA FORCE
/
Инструкция

Hardi COMMANDER DELTA FORCE, Инструкция, Страница: 110 / 218

Поделиться

Страница: 110 / 218

Hardi COMMANDER DELTA FORCE Скачать руководство пользователя страница 110

5 - Operation

110

Steering

Driving Technique for SafeTrack

A steered trailer using SafeTrack behaves differently than a standard
trailer. In steering position, the sprayer’s centre of gravity is displaced
more outwardly compared to the centre line of a standard trailer.

A steered trailer has a decreased stability when turning, especially when
turning on hillsides (B).

To prevent overbalancing, pay attention to these guidelines:

•

Avoid sudden tight turns.

•

Slow down before entering a curve or turning. Drive with a
constant, low speed during the turn.

•

Never slow down too fast, never brake heavily and never stop
suddenly in a curve, or when turning on a hillside, when the
sprayer is articulated.

•

Be careful when turning on uneven ground.

•

Set the track width (A) as wide as possible.

•

The proper function of the hydraulic system is essential to obtain good stability.

•

A filled Rinsetank will significantly increase the stability.

€

DANGER! No persons are allowed in the operation area of the sprayer, when steering is unlocked!

±

WARNING! Never articulate steering, when the boom is in transport position.

Speed Limit

The SafeTrack is default limited to a driving speed of 18 km/h.

Driving in “Auto” with SafeTrack will trigger an overspeed alarm, and the steering will automatically be locked.

«
...
108
109
110
111
112
...
»

Содержание COMMANDER DELTA FORCE



























































































































































































































Отзывы:

Нет отзывов