background image

Warning & Safety Instructions

Please read before
installing and operating 
your new Hard by Design 
Solar Gas Firepit Burner

SOLAR - MACH LIT &
ELECTRONIC IGNITION FIREPITS

 

DO NOT

 if any part has been submerged under water, 

make sure any water is drained before use. Allow lava 
rock/fire glass to fully dry if wet before use. 

  Only use provided lava rock or fire glass. 

 

NEVER

 use any material that is nonporous and holds 

moisture such as gravel, pebbles, river rocks, etc. These 
materials, when heated will cause the trapped moisture 
to boil and fracture unexpectedly. Risk of injury.

 

DO NOT

 use the firepit in windy conditions as gusts 

may affect the burners flame in an unpredictable way. 
Turn off if these unsafe conditions exist.

 

NEVER

 leave fire unattended or attended by an adult 

that is unfamiliar with emergency shut-off. 

  Be aware of high surface temperatures. 

 

ALWAYS

 allow ample cooling time after shut-off 

before touching or covering firepit.

 

ALWAYS

 maintain a safe distance from fire.

 

ALWAYS

 isolate gas supply when not in use.

 

ALWAYS

 follow instructions regarding the care and 

use of propane gas bottles.

 

ALWAYS

 ensure the bottle is located a safe distance 

from the firepit.

 

ALWAYS

 when changing the bottle, make sure the gas 

control leaver is in the 

OFF

 position

27 Edentrumley Road, Mayobridge, Newry, Co. Down, BT34 2SG

t.

  

UK

 +44 (0)28 3085 0194        

t.

  

ROI

 00353 (0) 1524 0389

e.

  [email protected]        

w.

  www.hardby.design

f.

  www.facebook.com/hardbydesign

Содержание SOLAR










Отзывы: