For technical questions, please call 1-888-866-5797
26
BATTERY/ALTERNATOR TEST
Additional Functions
BATTERY/ALTERNATOR TEST
26
2.
Select
Vehicle Information
, then press the
ENTER
button.
The Vehicle Information menu
displays.
3.
Select
IPT
, then press
ENTER
.
4.
When the retrieval process is completed,
the
In-use
Performance
Tracking
statistics for the vehicle under test
display.
If In-use Performance Tracking is not available for your vehicle,
an advisory message shows on the diagnostic tool’s display.
Press
M
to return to the Main Menu.
5.
When you have finished viewing the statistics, press
M
to exit.
BATTERY/ALTERNATOR TEST
The Scan Tool can perform a check of the vehicle’s battery and
alternator system to ensure the system is operating within acceptable
limits. You can perform a battery check
only
, or an alternator system
(battery and alternator) check.
To perform a battery check ONLY:
1.
Press
M
and release.
The Main Menu displays.
2.
Select
Battery/Alternator Test
, then
press
ENTER
.
The
Battery/Alternator
Monitor
Menu displays.
3.
Select
Battery Test
, then press
ENTER
.
An “instructional” message displays, showing the procedures to
prepare the vehicle for the battery check.
4.
Prepare the vehicle for the battery check:
Turn the engine off.
Place the transmission in PARK or NEUTRAL, and set the
parking brake.
Make a visual check of the battery’s condition. If the battery
terminals are corroded or other damage is present, clean or
replace the battery as appropriate.
For “unsealed” batteries, make sure the water level in each cell
is above the battery plates.
Turn the ignition on.
DO NOT
start the engine.
5.
Press
ENTER
to begin the battery check.
Содержание ZURICH OBD2
Страница 1: ......