Page 7
For technical questions, please call 1-888-866-5797.
Item 62508
Temporary Installation
Note:
Use non-collapsible hose on Inlet.
1. When planning Pump location, select a clean, level,
dry location indoors or outdoors, close to the water
supply, with a 120V GFCI protected outlet nearby.
Note:
The Pump is not self priming. A Check
Valve is included to help keep Pump primed.
Figure E
2. Attach hoses to Inlet and Outlet.
3. Attach Check Valve to Inlet hose.
4. Place Inlet hose in water source.
5. Remove Priming Plug, fill cavity with
water until water overflows. Replace
Priming Plug and tighten securely.
Inlet
Hose
Outlet
Hose
Inlet
Outlet
Check
Valve
Figure F