•
Do not attempt calibration or service unless trained and another
person capable of rendering first aid and resuscitation is present.
GENERAL DESCRIPTION
The meter is a handheld 3 1/2 digital clamp meter for measuring DC and AC voltage,
AC current, Resistance and Continuity Test with battery operated.
FRONT PANEL DESCRIPTION
Transformer jaws
Pick up the AC current flowing through the conductor.
Hold button
When this button is pushed, the display will keep the last reading and
“
”
symbol will appear on the LCD until pushing it again.
Rotary switch
This switch is used to select functions and desired ranges as well as
to turn on/off the meter.
Back light
To use this function, press the Back light button. When this button is
pushed, the Back light of display is on. After about 3
−
5 seconds, the
Back light is self-off. The Back light is on again, just push this button
once.
Display
3 1/2 digit, 7 segment, 18mm high, LCD.
“V” jack
This is positive input terminal for VOLT measurements connection is
made to it using the red test lead.
“COM” jack
This is negative (ground) input terminal for all measurement modes
except current. Connection is made to it using the black test lead.
“
Ω
” jack
This is the positive input terminal for ohms. Connection is made to it
using the red test lead.
-3-