SAFETY INFORMATION
The digital clamp meter has been designed according to IEC1010 – 1 and IEC1010 –
2 – 032 concerning safety requirements for electrical measuring instruments and
hand – held current clamps with an overvoltage category (CAT
II
) and pollution 2.
SAFETY SYMBOLS
Important safety information, refer to the operating manual.
Dangerous voltage may be present.
Earth ground.
Double insulation (Protection class
II
).
The digital clamp meter complies with the requirements of the following European
Community Directives: 89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC
(Low Voltage) as amended by 93/68/EEC (CE Marking).
However, electrical noise or intense electromagnetic fields in the vicinity of the
equipment may disturb the measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within the measurement circuit.
Users should exercise care and take appropriate precautions to avoid misleading
SAFETY PRECAUTIONS
Follow all safety and operating instructions to ensure maximum personal safety
during the operation and to ensure the meter is used safely and is kept in good
operating condition.
-1-