Harbor Breeze OCEANSIDE, Руководство пользователя

Страница: 13 / 15

11 10
16
17
18
Lowes.com/harborbreeze Lowes.com/harborbreeze Lowes.com/harborbreeze Lowes.com/harborbreeze
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
D D
JJ
FF
C C
I I
FF
16. Attach the switch housing cover (D) to the switch
housing (C). Align holes in switch housing cover (D)
with holes on outer edge of the switch housing (C)
(Note: The wide gap in the edge of the switch housing
cover (D) should align with reverse switch on the
switch housing (C).) Re-insert screws and secure all
screws.
17. Install three 40 watt candelabra base type A15 bulbs
(J) to socket.
flat area flat area
raised
dimple
raised
dimple
18. Place the glass (I) into light fitter assembly (F),
aligning three flat areas on the top flange of the glass
(I) with the three raised dimples in the light fitter
assembly (F). Turn the glass clockwise until it stops.
13. Unscrew and remove the hex nut from the light fitter
assembly (F).
14. Insert wires from the light fitter assembly (F) through
the center hole of the switch housing cover (D) and
thread the switch housing cover (D) onto the light fitter
assembly (F). (Note: The wide gap in the edge of the
switch housing cover (D) should be vertical with the
two pull chain nuts on the light fitter assembly (F)).
Reinstall hex nut and tighten securely.
15. Connect the blue wire exiting the switch housing (C)
below the fan motor with the black wire from the light
fitter assembly (F) by connecting the plugs. Connect
the white wire exiting the switch housing (C) below the
fan motor with the white wire from the light fitter
assembly (F) by connecting the plugs. Carefully push
all wires back into the switch housing (C).
15
Blue
Outlet box
Black
White
White
Blue Blac
k
White Green
White
Green/
Grounded
Blac
k
Switch
C
F
White
Blue
Black
13
14
D
F
F
hex nut
hex nut