14
15
Hardware Used
11. Place glass (J) on the preassembled pipe on light kit
(I) until it is flush with the preassembled metal disk.
Secure with previously removed bowl cap (L) and finial
(M). Tighten securely.
12. Attach fan pull chain extension (BB) and light pull
chain extension (CC).
11
I
J
L
M
BB
CC
12
I
Hex Nut
Washer
Switch
housing
cover
13
I
GG
Switch
housing
cover
I
Screw
H
BB
H
Fan pull chain
14
15
16
13.
To install the fan WITHOUT the light
, remove the
hex nut and washer preassembled inside the switch
housing cover of the light kit (I) and detach the
switch housing cover.
14. Place the plug (GG) into the center hole of the
switch housing cover.
15. Remove and save the three preassembled screws
from the switch housing cover. Attach switch housing
cover to the bottom of the motor housing (H) by
aligning the holes in each part and re-installing the
previously removed screws. Tighten securely.
16. Attach fan pull chain extension (BB).
FINAL INSTALLATION
FINAL INSTALLATION
Assembly is now complete.
Light pull chain extensions
x
BB
CC
1
x
1
Fan pull chain extensions
Lowes.com/harborbreeze
Lowes.com/harborbreeze
