6.
15
Install one JD E11 halogen bulb (U) included.
(Fig. 6)
WARNING
: Do not touch halogen bulb (U)
with fingers or hands. Use foam included in
packaging to wrap around glass part of bulb
when installing bulb into socket. This will extend
the life of the bulb.
CAUTION
: When replacing bulb, allow bulb and
glass shade (O) to cool down before touching.
FINAL INSTALLATION
U
6
Molex
Connections
4. Remove one shade fitter screw (T) from post on
underside of shade fitter (P) and loosen the other
two shade fitter screws (T). (Fig. 4)
Connect
WHITE
wire from motor housing (E) to
WHITE
wire from light kit fitter (H). Connect
BLACK
wire from motor housing (E) to
BLACK
wire from light kit fitter (H). Make sure that molex
connections are secure. (Fig. 4)
4
E
P
T
H
5.
5
Align slotted holes in light kit fitter (H) with
loosened screws in shade fitter (P). Twist light kit
fitter (H) to lock. Re-insert shade fitter screw (T)
that was previously removed, and then tighten all
three shade fitter screws (T) securely. (Fig. 5)
E
P
T
H
E
