background image

12

WIRING

 

WARNING:

 To reduce the risk of fire, electrical shock or personal injury, wire connectors 

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from 

the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect 

to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION:

 Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

1.

  

Secure all wiring connections together with wire 

connector (AA) and the wire connectors from remote 

pack (W) according to the diagram and these steps:

• Connect the Green wires from the fan and the 

mounting bracket (D) to the Bare/Green (ground) 

supply wire. 

• Connect the Blue wire with white label from the 

receiver from remote pack (W) to the Blue fan 

wire.

• Connect the Black wire with white label from the 

receiver from remote pack (W) to the Black fan 

wire. 

• Connect the Red wire with red label from the receiver 

from remote pack (W) to the Black (hot/power) supply 

wire. 

• Connect the White wire with red label from the 

receiver from remote pack (W) to the White 

(neutral) supply wire.

• Connect the Black wire with red label from the 

receiver from remote pack (W) to the Black (live) 

supply wire. 

      Important:

 The Blue fan wire is power for the light. 

The Black wire is power for the fan. The White wire is 

common/neutral. The Green wire is the ground wire. If 

supply wires are different colors than referred to above, 

a professional electrician should determine proper 

wiring. 

  

Hardware Used

AA

Wire Connector

x 1

Black (hot/power)

White (neutral)

Bare/Green

(ground)

Red

Whit

e

White

Whit

e

Blac

k

Blue

Blue

Black

Gree

n

Gree

n

Receiver

2.  Wrap electrical tape (not included) around each 

individual wire connector down to the wire.

3.   Turn the spliced/taped wires upward and gently push 

the wires and wire connectors into the outlet box.

      

 WARNING:

 Ensure no bare wire or wire strands 

are visible after making connections. Place the 

Green and White wire connections on the opposite 

side of the outlet box from the Black and Blue wire 

connections.

1

3

AA

D

2

Содержание 40678






















Отзывы: