12
Lowes.com/harborbreeze
AUTOMATED LEARNING PROCESS/ACTIVATING CODE
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press the “ ” button
on the front of the remote control transmitter (I)
for 5 seconds. Use the remote control to test the
oscillation and fan functions (see operating
instructions below) to confirm the learning
process is complete.
IMPORTANT:
To prevent damage to remote
control transmitter (I), remove the battery (K) if
not used for long periods. Store the remote
control transmitter (I) away from excess heat.
2
(front)
I
Remove battery cover from back side of remote
control transmitter (I).
Set the code on the remote control transmitter (I)
by sliding code switches 1 through 4 to your
choice of up or down position. (Factory setting is
all up. Do not use this position.) Use a small
screwdriver or ballpoint pen (neither included) to
slide the code switch firmly up or down.
Install the battery (K) and then replace battery
cover on remote control transmitter (I).
1.
(back side)
1
Code Switches
Battery
Cover
I
K
CAUTION:
When disposing of household alkaline batteries, it is best to check with your local
and state recycling or household hazardous waste coordinators concerning the specifics of the
program in your area. You may also locate a recycling center by calling 1-888-224-9764 or
1-877-2-RECYCLE (1-877-273-2925) or visit www.call2recycle.org for more information.
