background image

SAFETY INFORMATION

           

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box                   

            marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use 
            mounting screws provided with the outlet box. Most outlet boxes commonly used for the 
support of lighting fixtures are not acceptable for fan support and may need to be replaced. 
Consult a qualified electrician if in doubt. 

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box. Secure the outlet 
box directly to the building structure. The outlet box and its support must be able to support the 
moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.

To avoid personal injury, the use of gloves may be necessary while handling fan parts with
sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan 
are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your 
house wire is larger than 12-gauge or there is more than one house wire to connect to the 
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control 
device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, be cautious when working around or 
cleaning the fan. Do not insert objects between the rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts 
OTHER than those provided with this fan will void the warranty.

This fan MUST be installed with the safety cable provided with the fan. Failure to use the
safety cable provided may result in personal injury, damage to the fan or damage to other 
property.

WARNINGS

CAUTIONS

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid 
electrical shock.

 

Read all instructions and safety information before installing your new fan. Review the 
accompanying assembly diagrams.

3

Lowes.com/harborbreeze

  

DANGER

If using this fan in a DAMP location, this fan must be connected to a supply circuit that is protected 
by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock
or death.

Содержание 0428798
















Отзывы: