HappyJapan HCH Plus, Инструкция

Страница: 40 / 355

-S3 -17
MESSAGES
5-3
5_3 U701
Below is a list of possible messages that may appear while operating the machine, along with
an brief explanation and suggested actions to take as a result.
The message with mark will be appeared with beep sound.
Press the screen (any location is okay), then message will disappear.
Start/Stop button
Message
>>Stop Switch
CAUTION: To prevent accidents.
The embroidery frame may move. Please
keep hands clear for your safety.
MESSAGE EXPLANATION OPERATION PAGE
Place to oil
Designated letter on
the display is due to be
lubricated.
Push [Done] and lubricate indicated location
with instruction in the reference page.
Push [Leter], if you can not lubricate right
away.
The message will be disappeared temporary,
but it will come up later.
23-1
Cleaning of
rotary fook
Cleaning of
thread cut
knife
Clean the rotary hook and
the thread cutting knife.
Clean with instruction in the reference page. 23-2
>>Stop Switch
The machine is stopped
because the stop button
was pressed while
embroidering the design.
Press the start/stop button to resume sewing.
>>End
The machine is stopped
because it has finished the
design.
If you wish to sew design again, please newly
hooped item on machine & press start/stop
button.
>>Change Stop
Machine stopped, because
you used "Stop at color
change point" function.
When you press the start/stop button,
the machine will select the next color
and resume embroidering automatically.
>>Color ?
Machine stopped, because
you used "Stop at color
change point" function.
Please select next needle number by needle
selection button then press the start/stop
button.
>>Thread Break
Machine stopped, because
upper or bobbin thread is
broken at displayed needle
number.
Please thread upper thread or check
bobbin thread then press start/stop
button to resume sewing.
>>Frame out
The "Frame out" function
has been executed.
Press the start/stop button if OK. 14-D