HappyJapan HCH Plus, Инструкция

Страница: 340 / 355

-FO -10
1. Press and move the frame to the original
point with the .
2. Press .
Press
and the embroidery frame will start
tracing the embroidery pattern. Confirm that pres -
sure foot and needle do not interfere with upper
arm.
Press
and the tracing will stop.
3. Press after the trace is completed.
NOTE: The embroidery frame comes back to the
original point(start point) of the pattern when tracing
is completed.
4. Press and the embroidery will start.
5. When embroidery is completed, the
message,“>>End” will be displayed and the machine
will stop.
NOTE: If the “Auto origin” function has been
activated in the pattern setting. the embroidery
frame returns to the original
point automatically before the machine stops.
>>End
6-1
STARTING TO EMBROIDER
: Original point
(Start point)
Original point (Start point)
Forward only when pressing
Backward only when pressing
You can confirm the position
and the pattern of embroidery
in advance.
Pause button
6_1 01
NOTE:
When stitching heavy cloth, place a support beneath the cloth to prevent the frame from tilting forward and maintain
stitching quality.
CAUTION:
Before start stitching, perform tracing and confirm that
the embroidery frame does not interfere with pressure
foot. This confirmation must be made especially when
stitching thick cloth near the end of embroidery area.