HappyJapan HCH Plus, Инструкция

Страница: 43 / 355

-S3 -24 5_5 V910
5-5
PREPARATION OF PATTERN DATA
Read embroidery pattern data
Read the pattern to be embroidered from the memory media.
These types of memory media can be used.
This machine is able to read FAT32 or exFAT format memory media, which are generally used.
•USB fl ash drive
If you initialize the memory media with your PC, please proceed with FAT32 or exFAT format.
Handling note of memory media.
Do not bend, drop, disassemble, charge or heat the memory media.
Keep away from humidity or direct sunlight.
To insert a USB fl ash drive
1. Insert the USB fl ash drive all the way into
the USB fl ash drive port of the machine (front
or right side of control box).
2. Read embroidery design data according to
following “Reading pattern data” in the next
section.
To remove a USB fl ash drive
Press or to return to the menu
mode or drive mode, and then slowly
remove the USB
fl ash drive by hand.
Removing note of USB fl ash drive
When removing the USB fl ash drive, be sure to press or to return to the menu
mode or drive mode.
If you remove the USB
fl ash drive while viewing, reading, or writing, the data in the USB fl ash
drive will be damaged.