HappyJapan HCD2-1501-40, Руководство по обслуживанию

Страница: 97 / 198

95
7. Loosen the setscrew fixing timing slit showed as bellow so
that timing slit can turn itself.
8. Adjust the distance between timing slit and timing board.
As showed bellow, adjust the distance between timing slit
and timing board to [ 0.7 + / - 0.2mm ] and tighten the
screw.
<NOTE>
Be careful not to bend timing slit, because it is very thin.
Finish of procedures.
Set screw
To let timing slit turn itself
Set screw
( 0.7 + /- 0.2 )mm