23
MODE OF OPERATION
CHARGING
GO!
ON THE ROAD
READY, SET...
ALREADY DONE
While I am being charged,
my LED lights up red. As
soon as I am fully charged,
it turns green.
I vibrate every 30 seconds
so that you treat your 4
quadrants equally.
If you press the power
button for 5 seconds, I’ll
“lock” for travel.
Use the power button
to start me and change
operating modes simply by
pressing the button again
(within 10 seconds).
After 2 minutes, I make two
brief vibrations. You can
keep on brushing if you
want.
CLEANING
DISPOSAL
1.
Take the brush head off and rinse the metal tip with
warm water. Please do not try to clean around the
seal of the metal tip with a sharp object because it
could damage the seal.
2.
Now, simply wipe the handle with a dry cloth.
1.
Rinse the brush head and bristles under running
water after every use. Then just shake excess water
off the brush head.
2.
Remove the brush head from the toothbrush
at least once a week and clean the connection
between the handle and the brush head with warm
water.
3.
Use a new brush head every 2-3 months for best
results. The indicator will tell you when: Simply
change it when the smile fades.
1.
Remove the plug from the mains socket before
cleaning the charging station.
2.
Then wipe the charging station with a slightly damp
cloth.
HANDLE
BRUSH HEAD
CHARGING STATION
Important: The handle, the brush heads, and the charging
station are not to be cleaned in the dishwasher. Do not
submerse the charging station in water. Do not use abrasive
cleaning agents. Also do not try to clean the charging
station with any kind of sharp metallic object or nylon
bristles.
RECYCLING
The environment is very important to us. When you
no longer use your happybrush, do not throw it in
with your normal household waste.
