25
Dispose of your happybrush at a recycling centre for used
electrical and electronic devices. More information is
available from your local authorities.
The CE label on this product is our way of
confirming that it complies with the valid, product-
specific European guidelines.
The voluntary certification “GS” stands for
“Geprüfte Sicherheit“ (certified safety)
following the requirements of the product
safety law. It certifies products that pose
no risk to the user when used in compliance
with operating instructions. Compliance is
reviewed by independent testing companies
such as TÜV SÜD.
To protect the environment, non-rechargeable
and rechargeable batteries must not be disposed
of with normal household waste, but must be
taken to suitable collection points. Also note the
relevant statutory regulations governing the
disposal of batteries.
TECHNICAL SPECIFICATIONS
Power
Voltage
Battery
Protection class
Protection level
Vibration
Type
Timer
Operation time
Charging time
3.0 W
100-240 V~ 50/60 Hz
3.7 V 800 mAh Li-Ion
Class III (Handle)
Class II (Charging station)
IPX5 (Handle)
IPX7 (Charging station)
Normal: 30.000 per minute
Sensitive: 26.000 per minute
Polishing: 30.000 per minute
Massage: 26.000-37.500 per minute
HS03
4-quadrants timer (every 30 seconds)
approx. 84 minutes
Charge for 24 hours the first time,
thereafter 16 hours
WARRANTY
SUPPORT
Your happybrush comes with a 1 year warranty as of the date of
purchase. If defects of material or function should occur during the 1
year warranty period, we will repair or replace your happybrush.
The original proof of purchase (original receipt or payment
confirmation) is to be sent to us as the warranty and proof of
ownership. The receipt must show the date of purchase, your name and
the full product type description of the device. The warranty applies
only to the original purchaser. Should the device be sold to a second
buyer, the warranty is no longer valid.
All claims from this warranty (which includes both the primary claim
as well as any secondary claims after a repair or a replacement) are
subject to a 12 month limitation period. The limitation period for the
primary warranty starts from the moment the defect is known or gross
negligent ignorance of the defect. The limitation period for secondary
claims begins with the delivery of the repaired or replaced product.
The product may be replaced with the same model or a comparably
equipped model. The replacement or repair of the product does not
justify a new warranty. The warranty does not apply to devices or
device parts subject to normal wear and tear and thus viewed as wear
parts. The warranty is void if the device has been damaged, not used
properly or not maintained properly. Repairs may only be done by
happybrush GmbH. To ensure proper utilization of the device, all of
the instructions which are listed in the operating instructions must be
complied with precisely. Using it and handling it in ways that are not
recommended in the instructions or
for which warnings exist are to be absolutely avoided.
Important: The warranty and warranty period for specific devices and
materials can differ from those shown here. These warranty restrictions
have no impact on the statutory claim to warranty. The following device
parts do not fall under the guarantee: Brush heads; damage due to
misuse, wrong use, negligence or changing the product; normal wear
and tear such as chipped spots, scratches, abrasions, discolourations
or fading.
happybrush GmbH
Amalienstr. 71
80799 Munich
Hotline:
Email:
Web:
+49 (0)89 24412635
[email protected]
www.happybrush.de
Importer: DS Direct GmbH | Am Heisterbusch 1, 19258 Gallin
