Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
(47)
TRANSPORTATION
Before the motorcycle is transported, drain the fuel in it
because it is highly combustible and tends to explode in
certain conditions. When draining, storing or filling fuel,
make sure there are no open flames, the engine has
stopped and the operating place is well ventilated. Fuel
should be drained following the steps below.
1. Turn off the engine and pull out key of the ignition
switch.
2. Drain fuel in the fuel tank into an appropriate container
with a siphoning method or another proper method.
3. Put the end of the drain pipe of the carburetor into an
appropriate container.
4. Loosen the drain screw to drain all the fuel in the
carburetor and then tighten the drain screw again.
B
CAUTION
Before transportation of the motorcycle, drain all
the fuel in the fuel tank and the carburetor.
B
CAUTION
Transporting the motorcycle in a normal riding
position to avoid leakage of its engine oil.
STORAGE
If the motorcycle is kept out of service in winter or any
other seasons, it should be maintained using proper
materials and devices. So it is recommended that your
motorcycle maintained by an authorized dealers. If you
want to maintain the motorcycle by yourself, please follow
the guidelines below.
Motorcycle
•
Support the motorcycle with the main stand and clean
it thoroughly.
Fuel
•
Drain the fuel from the fuel tank by the way of a siphon
of other proper methods.
Loosen the carburetor
drain screw and drain the carburetor completely, then
tighten the drain screw.
Battery
•
Remove the battery from the motorcycle.
NOTE: Remove the wire from the negative terminal first,
and then the positive terminal.
•
Clean the battery exterior with a diluted detergent
solution; eliminate rust stains on the terminal and wire
connectors.
•
Store the battery in a room with an ambient
temperature of above 0 ˚C.
Charge the battery
completely.
•
Recharge it every 3 months afterwards.
46
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
(47)