(12)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
NEUTRAL GEAR INDICATOR LIGHT
8
N
When the gear is in the neutral position, this indicator will
light up. If others, this indicator will be off.
LEFT HANDLE SWITCHES
DIMMER SWITCH
1
“
'
” position
The headlight low beam and taillight
will light up.
“
9
” position
The
headlight
high
beam
and
taillight will light up.
The high beam indicator on the
dashboard will also be lit.
B
CAUTION
Holding the dimmer switch between “
9
” and “
'
”
position will turn on both “
9
” and “
'
” headlight
beams. This operation can damage the motorcycle.
Use the dimmer switch only at “
9
” and “
'
”
position.
Do not stick tape on the headlight or
place objects in front of the headlight.
TURNING SIGNAL SWITCH
2
= 8
Moving the switch to the “
=
” position will engage the
left turn signals. Moving the switch to the “
8
” position
will engage the right turn signals. The indicator on the
dashboard will also flash. To cancel turn signal operation,
push the switch inward.
B
WARNING
Failure to use and failure to turn off the turn signals
can be hazardous Other drivers may misjudge your
course and this may result in an accident. Always
use the turn signals when you intend to change
lanes or make a turn. Be sure to turn off the turn
signals after completing the turn or lane change.
HORN BUTTON
3
,
Pressing this button will trigger the horn.
CHOKE LEVER
4
(A)
(B)
(C)
To make starting convenient, the motorcycle is provided
with a choke. During a cold engine start, pull the choke
lever to the position (A) and open throttle grip slightly to
start the engine. After the engine is started, pull back
the choke lever by half to position (B) and open throttle
grip slightly to make the engine continually preheat until it
reaches the required temperature. Finally, pull the choke
lever back to its original position (C). During a hot engine
start, put the choke lever in position (C).
(12)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
11
