78
Explanation
Assign System Alarm Output 1 ~ 4
Assign Pattern Alarm Output 1 ~ 4
Setting item
S.Alarm 1~ 4
P.Alarm 1~ 4
Explanation
Output assignment when controlling temperature
Output assignment when controlling humidity
Output assignment under RUN/STOP
Output assignment for WAIT operation
Output assignment for HOLD operation
Output assignment in case of sensor disconnection
Setting item
T.RUN
H.RUN
RUN/STOP
WAIT
HOLD
Sensor Burnout
6.7.5 D.O Configuration Setting 6
D.O Configuration Setting 4,5[Fig.115 & Fig116] is screens that functions such as alarm are
allocated to real relay output and open collector output.
[FIG.117] D.O Configuration Setting 6
Explanation
In case of D.I input, its output becomes ON for a setting time. IF RUN/STOP, STEP
and HOLD function input is set, its D.I will be not included.
Once program control ends, its output becomes ON for a setting time
After doing output of I.S(Inner Signal)#1,its output becomes ON after delaying for a setting time.
After doing output of I.S(Inner Signal)#1,its output becomes ON after delaying for a setting time.
(Delay signal 2 is only available in the middle of performing Delay signal 1
When selecting Humidity Set Value (H.SV) as "0" : stop controlling humidity, relevant
output will be on during set time.
Setting item
D.I ERROR (sec)
NORMAL END(sec)
DELAY Sig.1 (sec)
DELAY Sig. 2(min)
DRAIN Signal (min)
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:35 페이지 78
