HANYOUNG NUX TH500A Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 96

HANYOUNG NUX TH500A Скачать руководство пользователя страница 29

30

Fix-control is running a temperature and humidity by fixed set value (SV).

3.4.1 Running selection of Fix-control 1.

3.4 Running of Fix-control

Operation start: [FIG.12] Input the temperature set value (temperature SV) and humidity set value
(humidity SV) within the fix control operation stop status screen and press the

button then the fix control operation will be started just like a [FIG.13]. Here,

button on the

upper right side will be changed to

and

button on the lower right side will be displayed

with the red color.
Operation stop: Press the

button on the lower right side to stop the operation.

("Stop the system control" will be displayed). Here, press

to stop the operation

YES

[Fig.12] Running stopped screen 1 for Fix control

[Fig.13] Running screen 1 for Fix control

When selecting the fix control or program control, press the

button within the fix control

operation stop [FIG12] screen then function setting screen will be displayed. Within this screen,
press the

button to select the operation method of function setup 1 screen. Pressing

the

button will select the fix control. Set each of setting lists in the operation setting screen

2 by pressing the

button.

While performing the fix control, changing the set value (SV) will automatically change the PID ZONE
applying number in accordance with the set value. If users want to use the specific PID zone,
please input the PID zone number after inputting the set value. During operation, if

and

button appear on the lower side of fix control operation screen, each of these refers to temperature
and humidity auto tuning button. Auto-tuning is operated only in the fix control operation mode and
it runs the auto-tuning by pressing the button after inputting the temperature and humidity set value.

In case where users need to stop the auto-tuning, please press the
(temperature side auto-tuning button) or

(humidity auto-tuning button). Obviously pressing the

fix control button will

the control operation and auto-tuning.

During auto-tuning, all of the computing values corresponding to the auto-tuning will not be saved
if users stop the auto-tuning while it is operating. Auto-tuning can be operated up to 24 hours and
elapsing the indicated hours will stop the auto-tuning.

th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:34 페이지 30

«
...
27
28
29
30
31
...
»

Содержание TH500A

































































































Отзывы:

Нет отзывов