Hanwha Vision TNV-C7013RC, Руководство пользователя

Страница: 11 / 30

English _
11
!
INST
ALLA
TION & CONNECTION
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in < Setup ( ) >-< Event >-< Storage >, set the device to < Off > and press the [ Apply ]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
Inserting a Micro SD card
Slide the Micro SD card into the Micro SD card slot on the camera module in the direction of the arrow.
J
`
Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
`
Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
`
Product disassembly or Micro SD card removal are not recommended in rainy or humid weather.
`
When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in
order to prevent accidents due to loss or drop of any parts.