Hanwha Vision TNO-C3010TRA, Руководство пользователя

Страница: 11 / 30

English _
11
!
INST
ALLA
TION & CONNECTION
Installation (Mount plate)
[Directly installing on wall/ceiling]
1-1. Place the mount plate on the desired location considering the direction to be monitored, mark the
locations for the screw holes and cable holes, and then drill the holes.
1-2.
Fix the Mount plate using appropriate screws.
1-3.
Pull out necessary cables among network/audio/alarm/RS-485/power cables through the hole in the
Mount plate.
[Installing using pipe]
2-1.
When installing it using a pipe, you can do so after removing the wiring hole cover on the bottom of the product.
Use a Phillips screwdriver to remove the fixing screws from the bottom cover and detach the wiring hole cover.
2-2. Join the conduit adaptor (SBP-060BA, separately sold) to the mount plate.
2-3. Mount the pipe to the conduit adaptor.
Put on the cover
Tighten two screws
2-4.
Fix the mount plate using appropriate screws.
2-5.
Pull out necessary cables among network/audio/alarm/RS-485/power cables through the pipe.