Hanwha Vision TNO-C3010TRA, Руководство пользователя

Страница: 18 / 30

installation & connection
18_
installation & connection
Power Supply
J
`
If the power sources for PoE and DC 12 V are simultaneously turned on, the device power will be supplied by both of PoE and
DC 12 V.
`
You can also use a router featuring PoE to supply power to the camera.
`
Use PoE that is compliant with the IEEE 802.3af protocols.
` If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
Power Cable Specification for Each Model
Input power Wire Type (AWG) Cable Length (Max.)
DC 12V
#18 27 m
#20 17 m
#22 10 m
J
`
Be careful not to reverse the polarity when you connect the power cable.
Network Cable Specification
Item Contents Remark
Connector RJ45 (10/100/1000BASE-T)
Ethernet 10/100/1000BASE-T
Cable Category 6
Max Distance 100 m DC Resistance ≤ 0.125 Ω/m
PoE Support IEEE 802.3af
Connecting to Audio Input/Output
Network
PC
Microphone
Speaker
Microphone
Speaker
1. Connect the MIC port of the camera with the microphone or LINE OUT port of the amplifier that the
microphone is connected to.
2. Connect the SPEAKER port of the camera with the speaker or LINE IN port of the amplifier that the
speaker is connected to.
3. Check the specifications for audio input.