Hanwha Vision PNO-A6081R, Руководство пользователя

Страница: 32 / 56

32_ outdoor bullet camera
outdoor bullet camera
INSTALLATION
J
` This camera is waterproof and in compliance with the IP67 spec, but the jack connected to the external cable is not. You are
recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
• Select an installation site that can hold at least 5 times the camera’s weight.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
• If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
• Do not use the sunshield hole for any purpose other than for connecting the sunshield.
Inserting a Micro SD card
Slide the Micro SD card into the Micro SD card slot on the camera module in the direction of the arrow.
J
` Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
` Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
` When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
` When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in order
to prevent accidents due to loss or drop of any parts.
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in < Storage >, set the device to < Off > and press the [ Apply ] button and turn the
camera off.
` If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.