Hanwha Vision PNO-A6081R, Руководство пользователя

Страница: 45 / 56

English _ 45
●
INST
ALLA
TION & CONNECTION
Connecting to the I/O port box
Connect the Alarm I/O cable to the corresponding port of the port box.
Alarm Sensor
Alarm-related Connector
J
` Make sure to connect the provided audio/alarm cable before use.
Color Function Description
BROWN : ALARM I/O 1
ORANGE : ALARM I/O 2
ALARM I/O 1,
ALARM I/O 2
These two ports are configurable from the web viewer, as they can
be used as Alarm in or Alarm out
※
Alarm I/O changes can be made through the Webviewer setup.
RED DC 12V/50mA
This pin supplies a continuous 12VDC output with a maximum
amperage of 50mA
BLACK GND It is a ground terminal.
Connecting to the I/O port box(PNB-A6001)
Connect the Alarm I/O cable to the corresponding port of the port box.
RESET
AUDIO
OUT
AUDIO
IN
USB
VIDEO
LINK
FOCUS
NETWORK
PoE+
DC 12V
+
1 : ALARM 1
2 : ALARM 2
3 : GND
4 : ALARM OUT
(12V 50mA)
5 : GND
6 : RS-485+
7 : RS-485-
1 2 3 4 5 6 7
PoE+
DC 12V
+
1 : ALARM 1
2 : ALARM 2
3 : GND
4 : ALARM OUT
(12V 50mA)
5 : GND
6 : RS-485+
7 : RS-485-
1 2 3 4 5 6 7
Function Description
ALARM 1, ALARM 2
These two ports are configurable from the web viewer, as they can be used as Alarm in
or Alarm out
※
Alarm I/O changes can be made through the Webviewer setup.
GND It is a ground terminal.
ALARM OUT This pin supplies a continuous 12VDC output with a maximum amperage of 50mA
RS-485
By connecting an external device to the [RS-485 +, –] port, the external device can be
controlled.
J
The GND connection is recommended for RS-485 communications. If you
encounter a communication failure, connect the GND pin as appropriate to correct
the GND level between camera and external device.