Hanter® Wireless Intelligent Alarm Systems - Model HM2088
a.
Operate by Keychain Remote Control
Press of
“
”
the Keychain Remote Control, the control Panel will emit “Ding
Dong” sound to confirm the alarm system enters into Home Arm status.
b. Operate by Keypad of Control Panel
Step 1: Press the “Program” key on Control Panel
Step 2: Input 4 digits “Password”
Step 3: Press “Home Arm” key
Step 4: The Control Panel will emit “Ding Dong” sound to confirm the alarm
system enters into Home Arm status
5.2.3 Silent Alarm:
(The siren will not buzzing when alarm is triggered)
a.
Program by Keychain Remote Control
To activate Silent Alarm
Press both
“
” and key
“
”
the Keychain Remote Control are to turn off the
siren. The Control Panel will emit “Ding Dong” sound to confirm the alarm system
enters into Silent Arm status.
To disable Silent Alarm:
Press both
“
” and key
“
”
the Keychain Remote Control are to reactivate the
siren. The Control Panel will emit “Ding Dong” sound to confirm the alarm system
successfully disable Silent Alarm status.
b. Program by Keypad of Control Panel
To activate Silent Alarm
Under disarming status, press both “1” & “#” key on the Control Panel, The will emit
“Ding Dong” sound to confirm the alarm system enters into Silent Alarm status.
To disable Silent Alarm
Press both “0”& “#” key on the Control Panel to reactive the siren, the Control Panel
will emit “Ding Dong” sound to confirm the alarm system successfully disable Silent
Alarm status.
5.2.4
Disarm
Press “
” key of keychain Remote Control to enter into Disarmed Mode. The
Control Panel will emit “Ding Dong” sound to confirm the alarm system successfully
enters disarmed status. The Control Panel will not receive any signal from any
sensors, switches or detectors except Emergency Help Button.
5.2.5 Emergency help
Press “
”
key of the Keychain Remote Control, the Control Panel will be
automatically trigger the siren and immediately autodial the preset telephone
numbers.
Note: When the alarm is triggered, the siren cannot be stopped immediately by Pressing
“
” key on the Keychain Remote Control. This is because of our intelligent alarm
System will stop all functions and give priority to call the pre-set telephone numbers.
The sire can be disarmed after 5 – 10 seconds.
P. 10
Hanter® Wireless Intelligent Alarm Systems - Model HM2088
5.2.6 Anti-cut
During armed status, when the telephone line is cuts, the Control Panel will
auto-matically trigger the siren.
Note: This feature will not be practical if your telephone is unstable.
5.2.7 Telephone Call Notification (when away from premise)
When the alarm triggered, the user (pre-set number) will receive a call with the
pre-recorded voice message. The option/action is:
a.
Press the “*” key of your phone to stop the siren
The system will activate the communication port immediately to enable the owner
listen to whatever movement or activities in the detected compound. The listening
period is 20 seconds. It can be extended every 20 seconds by press “*” key each
time.
c. Next, by pressing “1” and “*” key of the phone keypad, the alarm system will
establish dual communication function that enable the user to communicate with
anybody on the alarming spot via the Control Panel. The communication period is
5 seconds. It can be extended every 5 seconds by press “1” and “*” key each time.
d.
Press “#” to exit and the system will back to arming status. The process of
auto-dialing will continue until someone acknowledges it with “#” key.
Reminder: Should you be away for long period and cannot be reached, it is advisable to
reset your priority pre-set numbers.
5.2.8 Identifying Alarm Message by Incoming Call
a. Double “Beep” every 2 seconds means
Smoke alarm
b. Single “Beep” every 2 seconds means
Gas Leakage alarm
c. No sound (except for voice message announcement) indicates that the alarm is
triggered by either Door Switch, Motion Sensor or Emergency Help Button.
5.2.9 Long Distance Remote Control
Step 1: Dial the Telephone number connected with the Control Panel.
Step 2: After 8 ringing tones, a 5 beeping sound will emerge
Step 3:Enter the Password. Another 5 beeping sound will emerge to confirm
password
Step 4: Press “0” to stop the siren, Press “1” to start siren, Press “2” to activate
Silent Alarm, Press “3” to deactivate Silent Alarm, Press “4” for Home Arm,
Press “5” for Away Arm, Press “6” for live feed listening. Press “7” to quit
live feed listening, Press “8” to enable Control Panel receive signal from
Smoke and Gas leak Detector. Press “9” to disable Control Panel receive
signal from Smoke and Gas leak Detector.
Reminder: It will not work if someone picks up the telephone immediately. If you key
in wrong password (3 times), the line will be disconnected automatically
.
P. 11