![Hanseatic WQP8-7710D Скачать руководство пользователя страница 66](http://html1.mh-extra.com/html/hanseatic/wqp8-7710d/wqp8-7710d_user-manual_594649066.webp)
Page EN-28
Using for the first time
Adjusting the water hardness
Hard water will cause calcification within the
dishwasher. Also, more dishwasher detergent
will be required to clean the dishes. Soft water
increases foaming. For this reason, the degree
of hardness of the water has to be determined
and adjusted even before the first use. You
can determine the water hardness from your
water bill or enquire about the degree of hard-
ness at the water supply company. The appli-
ance is factory-set to the
H3
hardness level.
Water hardness
°dH
Display
0–5
H1
6-11
H2
12-17
H3
18-22
H4
23-34
H5
35-55
H6
(1)
(6)
(13)
(14)
The subsequent steps must be carried out
quickly one after the other, otherwise the ad-
justment process will be interrupted.
1. Switch the appliance on.
The LED for the ECO programme soon
lights up.
2. Press and hold the
button (6) until the
display shows the water hardness (e.g.
H3
).
3. Push the button as many times as re-
quired to display the required hardness
Using for the first time
level.
Around 5 seconds after you last press
the button, the standard display will once
again appear. This means the setting is
saved.
Test run
It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and in order to ensure that the device
functions perfectly.
If no water escapes during the test run and if
there are no unusual noises, the appliance is
ready to use.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
See chapter „Dishwasher operation“ from
page EN-17 for the procedure.
Содержание WQP8-7710D
Страница 38: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 38 ...
Страница 75: ...Page EN 37 Technical specifications ...
Страница 76: ......