Page EN-25
Installation, fitting, connection
7. Push the dishwasher into the recess.
UP
DOWN
(28)
8. To enable the dishwasher to be posi-
tioned levelly, both front and back appli-
ance feet can be adjusted by up to 5 cm.
– Both front feet are equipped with slots.
Insert a screwdriver into one of the slots
and use it to turn the appliance feet to
the desired height.
– You can use the middle adjustment
screw (28) to adjust the height of the rear
appliance foot. Use a Phillips-tip screw-
driver for this.
9. Check the alignment with a spirit level.
10. Make sure the top edge of the dish-
washer is up to the bottom edge of the
worktop to prevent it from tipping forward
when you open the dishwasher door.
(e)
(i)
(f) (i)
11. Screw the dishwasher to the kitchen
unit.
a) If you have granite worktops, re-
move the internal side cover caps (f)
and screw the dishwasher to the ad-
jacent kitchen cupboards.
Replace the cover caps on the round-
head screws (i).
b) For all other worktops, screw the
mounting bracket (e) firmly to the work
surface.
Содержание WQP8-7710D
Страница 38: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 38 ...
Страница 75: ...Page EN 37 Technical specifications ...
Страница 76: ......