![Hanseatic WQP8-7710D Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/hanseatic/wqp8-7710d/wqp8-7710d_user-manual_594649044.webp)
Page EN-6
Safety
Safety
Intended use
The dishwasher is exclusively intended
for washing dishes in ordinary quanti-
ties for private households and is not
suitable for commercial use or multiple
use (e.g.: use by several parties in a resi-
dential apartment block).
Prior to use, the appliance must be
properly installed in a kitchen unit.
Only use the dishwasher as described
in this user manual. Any other use is
deemed improper and may result in
damage to property or even personal
injury. The manufacturer accepts no li-
ability for damage caused by improper
use.
Explanation of terms
The following symbols can be found in
this user manual.
WARNING!
This symbol indicates a hazard with a
medium level of risk which, if not avoid-
ed, could result in death or serious inju-
ry.
CAUTION!
This symbol indicates a hazard with a
low level of risk which, if not avoided,
could result in minor or moderate injury.
NOTICE
This symbol warns against possible
damage to property.
This symbol refers to useful addi-
tional information.
Safety notices
In this chapter you will fi nd general
safety instructions which you must al-
ways observe for your own protection
and that of third parties. Please also
observe the warning notices in the indi-
vidual chapters.
Risks in handling household
electrical appliances
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Only use the appliance indoors. Do
not use in wet rooms or in the rain.
■
Do not operate or continue to oper-
ate the appliance, if
– it shows visible signs of damage, e.g. the
power cord is defective.
– it starts smoking or there is a smell of
burning.
–
it makes unfamiliar noises.
In these cases, you should pull the
mains plug out of the socket or switch
off/unscrew the fuse and have the
appliance repaired (see „Service“ on
page EN-32).
■
The appliance corresponds to pro-
tection class I and may only be con-
nected to a plug with a protective
conductor that has been installed
properly. Ensure that the voltage is
correct when connecting it. You can
fi nd more detailed information about
this on the nameplate.
■
If the mains plug is no longer acces-
sible after installation, an all-pole dis-
connecting device complying with
overvoltage category III must be
connected into the house wiring with
a contact gap of at least 3 mm; this
Содержание WQP8-7710D
Страница 38: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 38 ...
Страница 75: ...Page EN 37 Technical specifications ...
Страница 76: ......