![Hanseatic WQP8-7710D Скачать руководство пользователя страница 49](http://html1.mh-extra.com/html/hanseatic/wqp8-7710d/wqp8-7710d_user-manual_594649049.webp)
Page EN-11
Dishwasher detergents, rinse aids and dishwasher salts
Adding rinse aid
NOTICE
Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
compromise the rinsing results.
■
Wipe away rinse aid which has over-
fl owed immediately.
■
Take note of the markings for the
maximum fi ll quantities (“max”) in
the rinse aid chamber.
Using unsuitable substances can cause
damage to the dishwasher.
■
Only put rinse aids which are suita-
ble for dishwashers into the rinse aid
chamber.
(14)
• Fill in rinse aid before first use and when
the LED (14) lights up. Exception: Use
multitabs that already contain rinse aid.
As rinse aid is automatically dispensed
during operation, it ensures that the dish-
es are spot-free and accelerates the dry-
ing process.
(22)
1. Open the cover to the rinse aid compart-
ment (22).
2. Fill the water tank to the “max” mark in
the opening.
3. Wipe away any rinse aid which has spilt
immediately so that you don’t compro-
mise the rinsing results and to avoid in-
creased foaming.
4. We would recommend that you do not
change the dosage set by the factory (D3)
initially. Only correct the dosage if you are
not satisfied with the rinsing results (see
below).
5. Close the compartment again.
Amend the rinse aid dosage
If the dishes are matt and spotted after clean-
ing, increase the dosage. If the dishes are
sticky and streaked, reduce the dosage.
The subsequent steps must be carried out
quickly one after the other, otherwise the ad-
justment process will be interrupted.
1. Switch the appliance on.
The LED for the ECO programme soon
lights up.
2. Press and hold the
button (6) until the
display shows the water hardness (e.g.
H3
).
3. Press the button (2).
The currently set rinse aid dosage is dis-
played(e.g.
d4
).
4. Push the
button (6) repeatedly until
the desired setting is shown on the dis-
play (D1=lowest dosage).
Around 5 seconds after you last press
the button, the standard display will once
again appear. This means the setting is
saved.
Содержание WQP8-7710D
Страница 38: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 38 ...
Страница 75: ...Page EN 37 Technical specifications ...
Страница 76: ......