Assembly
Page GB-16
50 cm
50 cm
50 cm
40 cm
40 cm
5 cm
5. Drill a hole with the same diameter as the
wall plug into the wall to a sufficient depth
at each of the marked points.
2x
2x
6. Insert all four screw wall plugs into the
drilled holes.
7. Screw in two fixing screws in the outer
wall plugs.
Around 1 cm of both fixing screws must
be left protruding.
Attaching the exhaust hood
7
1. Carefully attach the exhaust hood to
the hangers
7
using the two outer fixing
screws.
2. Screw in two fixing screws into the inner
wall plugs and tighten.
3. Tighten fixing screws.
The exhaust hood is now mounted to the
wall.
[
3
1
4
4.
For exhaust air operation only:
Place
the check valve
3
on top of the exhaust
hood
1
and screw tight using four plate
screws
4
.
5.
If the exhaust hood is being installed
beneath a cupboard
: mark the air outlet
for the exhaust air hose
2
on the bottom
of the cabinet and saw the opening into
the cabinet. To do this
– drill a hole inside the circle using a wood
drill;
– cut out the circle from there using a jig-
saw;
– smooth the edges with sandpaper.
6
2
3
