Operation
Page GB-8
Requirements
– You have read the chapter entitled „Safety“
on page GB-4.
– The exhaust hood is assembled as de-
scribed in chapter „Assembly“ on page
GB-15.
Activated charcoal filter
• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it
may be a good idea to insert activated
charcoal filters for exhaust air operation,
too.
• For the source of supply, please see
chapter „Our Service Centre“ on page
GB-19.
• To insert „Installing/replacing activated
charcoal filters (only for circulation air op-
eration)“ on page GB-11.
Control elements
9
10
11
12
13
9
Timer
button for setting the switch-
off delay
10
Button for switching the light on and
off
11
Fan power pre-selection and display (4
settings)
12
Button for switching the fan on and
off
13
Button for switching the appliance
on and off
Operation
Switching the appliance on
and off
14
13
• To switch on, touch the button
13
for
3
seconds
.
The cover
14
will open, the fan will run for
a few seconds at the highest setting and
will then regulate itself down to the lowest
setting, and the light will switch on.
• To switch off, press the button
13
for
another
3 seconds
.
The light will switch off and the cover
14
will close.
Fan
Your exhaust hood fan has four settings. At
the lowest setting, 2 of the bars will be illu-
minated, 4 bars on the next-highest setting,
then 6 and at the highest setting 8.
When you switch the appliance on, it will run
for a few seconds at the highest setting be-
fore it automatically regulates downward to
the lowest setting. During the setting process,
the indicator lights will flash
12
as well as
the bars, initially all 8 and then 2.
1. Touch the fan pre-selector
11
in the area
that corresponds approximately to the de-
sired fan strength.
The corresponding number of bars and
the button
12
will illuminate and flash
for a few seconds.
2. To change the fan strength during oper-
ation, repeat step 1 with the desired fan
strength.
