Care and maintenance
Page GB-11
4. Wash grease filters in a dishwasher or in
the sink like ordinary crockery.
5. Allow grease filters to dry completely.
6. Reinsert the grease filter. To do this, insert
the grease filter in the top of the recess:
Slide the lock upwards, press down on
the grease filter and release the lock. The
grease filter engages.
7. Reconnect the power supply.
8. To close the flap
14
of the exhaust hood
1:
press the button
13
(
for 3 seconds
).
Installing/replacing activated
charcoal filters (only for
circulation air operation)
The activated coal filters remove odours.
They have to be replaced as soon as the
cooking odours can no longer be adequately
filtered. If used frequently, the filters should be
replaced regularly (check every 6 months).
1. To open the cover
14
of the exhaust hood
1
upwards, press the button
13
for 3
seconds
.
2. Once the cover has reached the highest
position: Unplug the mains plug or switch
off the power to the corresponding main
fuse.
3. Slide the grease filter lock 8 sideways and
carefully remove the grease filter by pull-
ing upwards.
5
4. To replace: Turning them clockwise, un-
screw both activated charcoal filters
5
to the right and left of the motor
and
remove them
. You can dispose of them
with household waste.
5. Fit the activated charcoal filters
5
to the right
and left of the motor and tighten them by turn-
ing them
anticlockwise
, allowing the locks to
click into place.
6. Reinsert the grease filter. To do this, insert
the grease filter in the top of the recess:
Slide the lock upwards, press down on
the grease filter and release the lock. The
grease filter engages.
7. Reconnect the power supply.
8. Close cover
14
by pressing the button
13
(
for 3 seconds
).
