Operation
Page EN-11
Before getting started
– Read the "Safety" chapter from page EN-4.
– Set up and connect the appliance as
described in chapter "Start-up" from
page EN-18.
Key tones
Each time you press one of the keys num-
bered (7) to (9) and (11) to (13), you will hear
a beep. This tells you that the appliance has
registered your keypress.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
A beep will sound. The temperature indica-
tor (10) will show the current internal tem-
peratures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching on
• Press the key (7).
A beep will sound.
The temperature indicator (10) will show
the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching off
• Press the key (7).
The temperature indicator (10) will go out.
The compressor will not work and the ap-
pliance will stop cooling. The appliance is
switched off.
C
F
8.8.
8.8.
(13)
(12)
(11)
(10)
(9)
(8)
(7)
(7)
Switch Wine refrigerator on/off
(8)
Switch light on/off
(9)
Select temperature zone
(top/bottom)
(10)
8.8.
8.8.
Temperature indicator
(11)
Increase temperature
(12)
Reduce temperature
(13)
C
F
Change temperature unit between
Celsius and Fahrenheit.
Operation
