Safety
Page EN-9
Risk of damage
NOTICE
If the appliance has been transported
horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■
Do not tilt the appliance more than
45° or lay it on its side.
■
Allow the cooling unit to stand up-
right for two hours before start-up.
The lubricant will fl ow back into the
compressor during this time.
Improper handling of the appliance
can lead to damage to property.
■
Do not use the door to pull or lift the
appliance.
■
The appliance must only be placed
on a level and fi rm surface. The sur-
face must be strong enough to sup-
port the appliance’s weight when ful-
ly laden.
■
Do not operate the appliance near
sinks, taps or containers fi lled with
liquids such as vases, aquariums, etc.
Make sure that the appliance does
not get wet.
■
The maximum load of 14 bottles per
bottle shelf must not be exceeded.
■
Do not use sharp or pointed objects
to unpack it.
■
Do not use any electrical parts inside
the appliance that do not conform to
the manufacturer’s recommended
design.
■
Do not use mechanical devices or oth-
er means to accelerate the defrost-
ing process, other than those recom-
mended by the manufacturer.
■
When cleaning, please note:
–
Never use harsh, granular, soda,
acid, solvent-based or abrasive
cleaners. These attack the plastic
surfaces. All-purpose cleaners with
a neutral pH are recommended.
–
Door seals and plastic parts are
sensitive to oil and grease. Remove
contaminants as quickly as possi-
ble.
–
Do not clean the appliance parts in
the dishwasher.
–
Use only soft cloths for cleaning.
■
Wait 5 minutes after switching off.
Only then switch the appliance on
again.
