Changing the door hinges
Page EN-27
(15)
(18)
12. Replace the hinge bolt (18) as shown
above.
(15)
(16)
(16)
13. Screw the hinge plate (15) back onto the
opposite side.
14. Screw both appliance feet (16) back on.
15. Reposition the appliance upright.
16. Remove the four decorative caps on the
left-hand side from around the middle
hinge and fasten them in the appropriate
place on the opposite side.
17. Unscrew the hinge bushings from the top
of the fridge compartment door and on the
bottom of the freezer door and screw them
back on tightly on the opposite side.
18. Place the freezer door on the lower hinge
bushings and close the door.
19. Position the middle hinge onto the freezer
door and screw it on tightly.
20. Check whether the freezer door is posi-
tioned accurately. If necessary, adjust it.
21. Position the fridge door on the bolts on the
middle hinge and close the door.
(10)
(11)
22. Place the upper hinge plate (11) on the
fridge door and then screw it tight using
the three screws (10).
23. Check whether the fridge door is posi-
tioned accurately. If necessary, adjust it.
(19)
24. Press the hinge faceplate (19) onto the
hinge plate and the covering plate into the
holes on the opposite side.
This is the final step in changing the direc-
tion in which the door closes.
