Page EN-13
Delivery
Depending on the recess into which the dis-
hwasher will be fitted, the dishwasher should
be connected before or after fitting.
– For the electrical connection of the dis-
hwasher, a professional must install an
earthed power socket with its own fuse of a
sufficient size (230 V~/50 Hz/10 A).
– The plug must be installed in such a way
that the recess into which the dishwasher
will be fitted is deep enough even when the
plug is plugged in.
– Do not use a multi-socket extension cable,
multi-socket plug, travel adapter, extension
cable or similar.
– We recommend using a pulse-sensitive re-
sidual current device (RCD).
• Insert the mains plug into the socket.
Substructure
NOTICE
Risk of damage to property!
Selecting the wrong screws can dama-
ge the worktop.
■
Select the correct screws with the
appropriate screw length.
■
Use the enclosed screws.
59.8 cm
60.0 cm
84.5 cm
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corres-
pond to the details in the diagram above.
1. Remove cardboard, polystyrene and
adhesive strips from the inside of the dis-
hwasher, if you have not already done so.
2. Loosen both screws on the reverse side of
the covering panel and remove them.
(c)
3. Affix the enclosed condensation-protecti-
ve film (c) to the bottom of the work surfa-
ce. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwas-
her if the dishwasher door is left open.
4. Place the dishwasher in the desired position.
Содержание HG6085E127635W
Страница 38: ......