
Page EN-3
Explanation of terms and symbols; definitions
Explanation of terms and symbols; definitions
Please read through the safety
notices and the user manual ca-
refully before using the applian-
ce. This is the only way you can use all the
functions safely and reliably.
Be sure to also observe the national regu-
lations in your country, which are valid in
addition to the regulations specified in this
user manual.
Keep all safety notices and instructions for
future reference. Pass all safety notices
and instructions on to the subsequent user
of the product.
You will fi nd information on
setup or under-worktop installa-
tion and connection on
page EN-11).
Explanation of terms
The following signal terms can be found in this
user manual.
WARNING
This signal term indicates a hazard with a me-
dium level of risk which, if not avoided, could
result in death or serious injury.
CAUTION
This signal term indicates a hazard with a low
level of risk which, if not avoided, could result
in minor or moderate injury.
NOTICE
This signal term warns against possible da-
mage to property.
Explanation of symbols
The following symbols can be found in this
user manual.
This symbol refers to useful additional
information.
Definitions
“Place setting” means a set of tableware in-
tended for use by one person, excluding ser-
ving dishes.
“Operating cycle” means a complete clea-
ning, rinsing and drying cycle, depending on
the selected programme, covering a series of
operations until the end of all activities.
“Programme duration” means the period from
the start of the selected programme, without
any preset time programmed by the user, until
the notification of the end of the programme,
from which point the user has access to the
tableware.
“Preset time” means a state in which the user
has postponed the start of the operating cy-
cle of the selected programme for a certain
period of time.
Содержание HG6085E127635W
Страница 38: ......