Page EN-32
Installation and connection
– Veneers or plastic coverings on the built-
in furniture require heat-resistant adhesive
(100 °C). If the adhesive and surfaces are
not heat-resistant, the covering may warp
and come loose.
– An intermediate shelf is required if a draw-
er is to be installed below the oven.
– The installation recess may not have a rear
panel, at the most it may have an add-on
edge measuring no more than 50 mm.
– The built-in cabinet can be equipped with
either ledges/rails or an intermediate shelf
with ventilation cut-out.
– The installation recess must have the fol-
lowing minimum dimensions
– Installation under a worktop
❶
600 mm
2
560 mm
❸
570 mm
4
600 mm
❺
max. 50 mm
❻
max. 50 mm
– Installation in an upright cabinet
❶
585 mm
2
560 mm
3
535 mm
4
min. 570 mm (
3
+
5
)
5
min. 35 mm
Installation under a worktop
Installation in an upright cabinet
2
1
5
6
4
4
3
2
3
1
5
