Page EN-22
The timer (Automatic mode)
The timer (Automatic mode)
Using the timer, you can set
– a cooking time;
– a timer for the end of a cooking process;
– a timer for the end of a cooking process
following a specific cooking time.
CAUTION!
Fire hazard!
There is an increased risk of fire in timer
mode!
Please ensure that you always observe
the following when using the timer.
■
Before starting the timer, please
make sure to inform all members of
the household so that they do not
put anything flammable in the oven.
■
Monitor the oven while using the tim-
er in order to prevent spills and burn-
ing.
■
Please note that fats, oils and alcohol
can catch fire quickly when heated.
■
Please note that the oven is not
switched on or off by the alarm func-
tion.
■
Never leave the oven unattended
when grilling in timer mode.
You can pre-programme the oven up
to 23 hours and 59 minutes in ad-
vance. The cooking time can be set
between 1 minute and 10 hours.
Any programming will be deleted in the case
of a power failure.
Setting a cooking time
1. Press the button (11) for approximately
3 seconds.
The power indicator (17) will appear on
the display.
2. Briefly press the button (11) again
(several times) until the indicator “
dvr
”
appears on the display.
3. Press the button (10) or (13) to enter
system setting mode.
88 88
A
0 30
A
The "0" in the time setting "
0:30
" will flash,
as well as the
A
indicator (16).
4. Now use the buttons (10) and (13) to set
the number of hours for the desired cook-
ing time.
5. Press the button (11) again.
6. Now use the buttons (10) or (13) to
set the number of minutes for the desired
cooking time.
7. Use the left toggle switch (9) to set the
desired cooking or baking function, and
the right toggle switch (14) to set the de-
sired temperature.
The cooking process will start. Following
the set cooking time, the appliance will
automatically switch to standby mode. An
acoustic signal will sound, and the
A
indi-
cator (16) will flash.
Setting an end time
1. Press the button (11) for approximately
3 seconds.
The power indicator (17) will appear on
the display.
2. Briefly press the button (11) again
(several times) until the indicator
“
End
”
appears on the display.
