Hanseatic 268 880, Руководство пользователя

Страница: 61 / 72

Built-in oven 65M90D0-E11319G
GB-25
Operation
Using the appliance as a
kitchen alarm clock (timer)
1. Press the button 11 for approximately 3
seconds. The power indicator 17 will ap-
pear on the display.
2. Briefly press the button 11 again until the
timer indicator 18 flashes on the display.
3. Press the button 10 or 13 to enter system
setting mode.
4. Set the desired length of time as described
in steps 4-6 under “Setting a cooking time”.
5. Briefly press the button 11 again.
88 88
A
14 45
A
The display will now show the current time,
as well as the power indicator
17 and the
timer indicator 18. Once the set time has
elapsed, an acoustic signal will sound, and
the timer indicator
18 will flash.
Please note!
• Following the set time, the appliance will
not automatically switch to standby mode.
To put it into standby mode, press the
button 11 and the button 13 simul-
taneously for approximately 3 seconds.
Deleting programmed settings
To delete a set cooking time and/or end time,
• press the button 11 and the button 13
simul taneously for approximately 3 seconds.
Pausing the programme
To pause a programme (cooking time, end time)
in progress,
• press the button 11 and the button 13
simul taneously for approximately 3 seconds.
Pausing the acoustic signal
The acoustic signal you will hear at the end of a
set cooking time normally lasts approximately 2
minutes. You can pause this acoustic signal at
any time:
• Briefly press any button (for fewer than 3
seconds).