Built-in oven 65M90D0-E11319G
GB-13
Preparation
Inserting the oven
WARNING
Risk of electric shock!
Incorrect installation/dismantling can
cause electric shock.
• Before installing/dismantling the
appliance, check that the socket to
which the appliance is connected is
switched off.
NOTICE
Risk of damage!
Improper handling of the appliance
can result in damage.
• Use only the side carry points to lift
the oven.
• Do not set the oven down on the
edge or corner of the oven door! The
glass panes can be damaged.
1. Push the oven into the recess until the
front fascia is flush with the installation unit.
The mains connection must not be kinked,
pinched or otherwise damaged.
2. Ensure an even gap between the oven and
the unit walls on both sides. Do not seal the
gap above the oven fascia.
19
3. Once the oven is correctly positioned, open
the oven door and screw into the unit using
the fitting screws
19
supplied.
4. Switch the socket fuse back on.
5. Check the functions as described from page
GB-14.
Removing the oven
1. Switch off the socket for the Oven before re-
moval. To do this, unscrew and/or switch off
the fuse for the socket.
2. Remove the two fixing screws
23
.
3. Lift the rear of the appliance and only pull it
out slightly at first. Then grab onto the side
recessed grips
2
and pull it out completely.
4. Disconnect the mains plug from the socket.
Содержание 268 880
Страница 72: ......