Care and maintenance
Page EN-23
(10)
(20)
14. Insert the dust bin (10) into
the bottom of the hous-
ing (20) and press the dust
bin (10) against the holder at
the top of the housing (20).
The dust bin (10) will audibly
snap into place.
Cleaning the housing
1. Wipe the housing with a damp
cloth if needed. Never allow
liquid to penetrate the vacuum
cleaner.
2. Clean the air vent (9) with a
soft brush from time to time.
Cleaning the floor
nozzle
1. Switch the vacuum cleaner off
and pull the mains plug out of
the socket.
(6)
(20)
2. Step on the release button (6)
and tilt the housing (20) toward
you with the handle (1).
3. Turn the vacuum cleaner
around so that you have ac-
cess to the floor nozzle (8)
from below.
4. Remove lint and dust resi-
dues that have adhered to the
brush (28) using the supplied
comb.
