HANSCRAFT TP 500, Руководство пользователя

Страница: 9 / 24

9
Control panel
5.4 Setting the temperature
Use the arrow buttons (labeled WARM and COOL) to set the temperature directly on
the monitor. The temperature range (high and low) is indicated by a thermometer
pictogram and a small arrow next to it. If the arrow is up, a high temperature range is
set, and if the arrow is pointing down, a low temperature range is set.
Temperature range
high 79 88 –104 °F
low 50 –98 6 °F
To set the high temperature range, proceed by pressing the following buttons: MENU
and then arrow up WARM.
To set the low temperature range, proceed by pressing the following buttons: MENU
and then arrow down COOL.
5.5 Heating mode
Here you can set the following heating modes:
ready in this mode the hot tub heats the water to the set temperature
rest in this mode the hot tub only heats the water during filtration
To change the heating mode, use the following combination of buttons:
MENU 2× + arrow WARM or COOL. Use the up or down arrow to select a mode. For
mode pictograms, see description of the control panel (Chapter 5.2). Confirm your
selection with the MENU button.
WARM MENU
MENU
MENU MENU
2×
( )
WARM
L temperature range
(high/low)
M settings
N filter cycle
(1 or 2 or both)
O time (AM or PM)