HANSCRAFT TP 500, Руководство пользователя

Страница: 5 / 24

5
Hot tub installation preparation
2 1 Preparation of the place for installation and connection to
electricity
The hot tub must be installed on a flat, sufficiently strong pad with regard to
the load-bearing capacity of the hot tub. If the hot tub is installed outdoors, we
recommend making a monolithic concrete pad with a minimum thickness of 10 cm. It
is always necessary to choose the load-bearing capacity of the pad with regard to the
dimensions and weight of the hot tub. Consult your building supervisor. The weight is
specified in the technical description of the hot tub.
CELTIC SPAS hot tubs are made for electrical connection of 400 V ~ alternating
current; it is therefore necessary to use a 3 × 16 A/C or 3 × 20 A/C circuit breaker and
a residual-current device corresponding to this connection. You will also need
a 5 × 2.5 mm cable. The cable must have 4 more usable meters in the place of
the hot tub so that it can be easily routed and connected to the control unit Do
not route the cable under the whirlpool! PLUG & PLAY hot tubs are made for 230 V
electrical connection with an installed circuit breaker and conductor.
2 2 Preparation of indoor hot tub installation
If the hot tub is installed indoors, safety precautions must be observed. The basic
requirements for the safe operation of the hot tub are anti-slip floors and drainage
of the installation site in the event of a water overflow. It is also necessary to
realize that humidity will rise around the hot tub, and this may damage surrounding
electrical appliances. We therefore recommend adapting the installation site to these
conditions. The whirlpool should always be accessible from all sides for future
service If it is not sufficiently accessible during the warranty period, the owner is
obliged to provide this access. (Sufficient access is generally considered to be at least
60 cm from all sides of the hot tub.)
2 3 Preparation of outdoor hot tub installation
If the hot tub is installed outdoors, safety precautions must be observed. The basic
requirements for the safe operation of the hot tub are anti-slip floors and drainage of
the installation site in the event of a water overflow from the hot tub. We therefore
recommend adapting the installation site to these conditions.
NO
YES