HANSCRAFT TP 500, Руководство пользователя

Страница: 18 / 24

18
Hot tub care
a) Do not open the control unit. There are no user-fixable parts inside.
b) Drain, clean and fill the hot tub with clean water on regular schedule.
c) Clean the filter cartridge at least once a week.
d) The hot tub user should have a proper shower before and after the use of the hot
tub.
7.2 Removal and cleaning of the filter cartridge
The hot tub filter cartridge can get clogged by calcareous and mineral particles from a
hard water, which can lead to a restricted water flow inside the filtration system.
We recommend to clean the filter cartridge at least once a week.
Remove the cartridge and the skimmer insertion. Using a garden hose, clean the
cartridge so that no settled dirt remains in the corners of the filter. Once clean, put
the insertion back to the skimmer. Put the cartridge inside the skimmer tank next
and close it. Remember that the filter cartridge has to be replaced every 3– 6 months.
Replace it even sooner if it is damaged or clogged, it is not usable in such state.
Make-up, sunscreens and other types of body lotion decrease the quality of the water
and lower the filter cartridge longevity.
7.3 Maintaining the quality of the water in the hot tub
WARNING: Always add the chemicals to the water, never the other way around
Add the chemicals to the water only when there are no people inside Use the
circulation pumps to mix the chemicals with the water Store the chemicals
according to the instruction on their label.
a) Use a suitable water hardness regulator regularly (the HANSCRAFT SPA
Water hardness regulator is recommended) and follow the instructions on the
chemicals‘ label.
b) Depending on the frequency of use of the hot tub, test the water quality regularly
by a suitable water quality tester.
c) Adjust the water pH level accordingly by suitable water chemicals
(the HANSCRAFT SPA – pH PLUS and pH MINUS is recommended).
d) Adjust the Cl (chlorine) level with suitable water chemicals (HANSCRAFT SPA
– MULTI MINI 3 in 1 tablets are recommended). Follow the instructions on the
chemicals‘ label.
For the chlorine to have the desired effect, the pH level needs to be
adjusted first.
e) We recommend you to clean/replace the filter cartridge before adding the chemicals.