17
Problem solutions
/
Hot tub care
GFCI test
(or RCD)
Appears with a regular frequency, e.g. every 30 days. GFCI – a ground
fault circuit breaker or a residual current device (RCD) are important
safety devices and must be tested regularly to verify their reliability.
Each user should be instructed on how to perform a GFCI or RCD safety
test associated with hot tub installation. The GFCI or RCD will have TEST
and RESET buttons to use that will allow the user to confirm that the
device is working properly.
CHNG WATR
Change the water
Appears with a regular frequency, e.g. every 90th day. Change the
water in the hot tub regularly to maintain its chemical balance and good
hygiene.
CLN COVR
Clean the cover
Appears with a regular frequency, e.g. every 180th day. Vinyl covers
should be cleaned and treated for maximum durability.
TRT WOOD
Treat wood surface
Appears with a regular frequency, e.g. every 180th day. The casing
and wooden equipment of the hot tub should be cleaned and treated
according to the manufacturer's instructions for their maximum
durability.
CHNG CART
Change the filter cartridge
Appears with a regular frequency, e.g. every 365th day. Filter cartridges
should be replaced from time to time to maintain proper hot tub
functionality and good hygiene.
CHEK OZ
Check the ozonator and UV lamp
We recommend an inspection by a qualified technician during regular
service.
SRV CHEK
Service check
Have a service technician check the condition of your hot tub
(repeat every 365 days).
7 Hot tub care
7 1
General information
Do not expose the hot tub to sun without water inside or a cover on top. The direct
sunlight can cause fading and deformation of the surface material. When you are not
using the hot tub, cover it with the thermo cover, regardless of whether it is empty
or full. Protect the hot tub from rain and snow. Place the hot tub under a gazebo or a
roof if possible.
Содержание TP 500
Страница 1: ...USER MANUAL TP 500 ...
Страница 23: ...23 11 Notes Notes ...