Hansa FCMW971291, Руководство по эксплуатации

Страница: 59 / 124

- 59 -
Gas hose passage way
Connect the appliance to the gas piping
tap in shortest possible route and in a
way that ensure no gas leakage will occur.
In order to carry on a tightness and
sealing safety check ensure that the
knobs on the control panel are closed
and the gas cylindir is open.
WARNING: While performing a gas
leakage check, never use any kind
of lighter, match, cigarette or similar
burning substance.
Apply soap bubble on the connection
points. If there is any kind of leakage
then it will cause bubbling.
While inserting the appliance in place
ensure that it is on the same level with
the worktop. If required adjust the legs
inorder the make level with the worktop.
Use the appliance on a level surface and
in a well ventilated environment.
WARNING: Before placint the appliance,
check that the local distribution conditions
(gas type and pressure) conform to the
product settings.
Figure 1
Figure 2
Nozzle change operation
• Please use driver with special head for removed and install nozzle as.
(Figure 3)
• Please remove nozzle (Figure 4) from burner with special nozzle driv-
er and install new nozzle. (Figure 5)
Figure 3
Figure 4 Figure 5